• Home
  • Tag: 上海外卖私人工作室

Huskies earn big win over Peace River

first_imgA big win for the Huskies on Saturday night. Facing their old foes, the North Peace Navigators, and clinging to second place in the NWJHL standings, coach Bob Kalb conceeded it was a must-win.Both teams came into the game charged, knowing the importance of the game.  It seemed like that energy might go to waste, when the referee took a puck in the face during the first play of the game, leading a lengthy delay.  But the Huskies remained focused, and played their best first period in quite some time. – Advertisement -Luke McInerney opened the scoring 7 minutes in, when he found his own rebound, and beat a helpless Bretton Stewart.  A couple of minutes later, the Huskies put the pressure on, and after cycling the puck for at least a minute, Jason Arnouse came off the bench, straight into the play, and fired home a Dan Pappin centring pass to make it 2-0.  Still more in the first, when Jon Spence snuck in from the point, and hit a one-timer on a pass from Steven Fast, to send the Huskies into the room up 3-0. Advertisement In the second, the pups continued their aggressive play, though the scoring sheet may not have been so kind. Cam McKinnon made it 4-0, on a Jon Spence rebound, bringing to an end Nav’s starter Bretton Stewart’s night. But then Peace River would fight back. A Lance Rapson point-shot hit the skate of Justin Vedress and trickled over the goal-line. Mitch Kohut made things interesting, when he fired a shot underneath Zach Blain’s arm, to make it 4-2. Advertisement Zach Blain earned the win in goal for FSJ, playing a solid game, including a couple of remarkable saves in the third. The team went 4/10 on the powerplay, while PR was 3/6 with the man advantage. Luke McInerney also impressed, earning player of the game honours, for his solid 2-goal performance. The win gives them a 6 point cushion on Peace River, as well as a three point gap on Dawson Creek (not counting the results of Dawson’s game in Slave Lake). The race for second place continues on Sunday afternoon, when the team hosts Beaverlodge on Sunday afternoon, at 2pm. Advertisement Asked what the team needs to do to finish in second place, Luke McInerney has a simple answer. “Win all our games,” he smiled. “Just work hard”. The Huskies added another, when Luke McInerney stuffed a puck underneath Tavis Clark. But before the period was out, Justin Vedress scored his second of the game, potting a Rapson rebound after Jesse Disher missed a check on Rapson, to make it 5-3 after 40 minutes. But in the third, while the parade to the penalty box continued, the Huskies put the lid on the Navs, killing 7 minutes of third period powerplay time. The only goal on the third came late, when Kyle Richardson took a hooking penalty, and then the Navs bench argued, leading to a two-man advantage for FSJ, converted by Cody Kalb. Special teams were the name of the game this night. 7 of the game’s 9 goals were scored on the powerplay, though the defining moment for Fort St. John came mid-way through the third, when they successfully killed a five-minute major penalty to Payden Wongstedt, who brought his stick up on Gerry Young, and earned 5 + a game. Advertisementlast_img read more

Half-time: Brentford 1 MK Dons 0

first_imgLasse Vibe’s sixth goal of the season put Brentford ahead at the break in Dean Smith’s first game in charge.The new head coach saw his initial plans derailed slightly when Alan McCormack pulled out in the warm-up and Sergi Canos came in for only the second start of his loan spell from Liverpool.And it took the Bees a little time to settle, with Josh Murphy firing wide from an angle and Dean Bowditch shooting straight at home keeper David Button.But on 20 minutes, Brentford showed Smith their counter-attacking potential with a wonderfully worked goal.Alan Judge began the move with a neat turn and sprint from halfway before releasing Jake Bidwell, whose cross was headed home by Vibe.After that, the Bees dominated and should have added to their lead before half-time.Judge wasted a good one-on-one chance as Dons keeper David Martin saved and he also struck the bar with a free-kick, while Antony Kay cleared Konstantin Kerschbaumer’s follow-up off the line.And on 33 minutes, a ball dropped to Canos, as the Dons looked decidedly uneasy at the back, but he too hit the woodwork.Brentford: Button; Yennaris, Tarkowski, O’Connell, Bidwell; Kerschbaumer, Diagouraga; Woods, Canos, Judge; Vibe.Subs: Bonham, Barbet, McEachran, Saunders, Gogia, Jota, Hofmann.MK Dons: Martin; Spence, McFadzean, Kay, Lewington; Potter, Poyet; Baker, Bowditch, Murphy; Maynard.Subs: Cropper, Hodson, Benavente, Carruthers, Powell, Hall, Gallagher.Follow West London Sport on TwitterFind us on Facebooklast_img read more

Tottenham out after Juve’s Wembley comeback

first_imgEmbed from Getty ImagesTottenham 1 Juventus 2(Juventus won 4-3 on aggregate)A stunning comeback by Juventus at Wembley knocked Tottenham out of the Champions League.After a 2-2 draw in the first leg in Turin, Spurs knew their away goals meant a clean sheet would guarantee them a place in the quarter-finals.And they found themselves in an even stronger position by half-time of the second leg courtesy of Son Heung-min’s goal six minutes before the interval.Son’s scuffed effort following Kieran Trippier’s ball across the face of goal was enough to put Spurs ahead and was a just reward for their first-half dominance.Embed from Getty ImagesBut the Italian side hit back by scoring twice in the space of three minutes midway through the second half.Gonzalo Higuaín netted from close range and then set up Paulo Dybala, whose goal proved to be decisive.Harry Kane headed against the post in the 90th minute as Tottenham tried in vain to find an equaliser.Tottenham: Lloris, Trippier, Sanchez, Vertonghen, Davies, Dier (Lamela 74), Dembele, Eriksen, Alli (Llorenta 86), Son, Kane.Subs not used: Vorm, Rose, Wanyama, Lucas, Sissoko. Follow West London Sport on TwitterFind us on Facebookby Taboolaby TaboolaSponsored LinksSponsored LinksPromoted LinksPromoted LinksRecommended for youAspireAbove.comRemember Pauley Perrette? Try Not To Smile When You See Her NowAspireAbove.comUndoLifestly.com25 Celebs You Didn’t Realize Are Gay – No. 8 Will Surprise WomenLifestly.comUndoUsed Cars | Search AdsUsed Cars in Tuen Mun Might Be Cheaper Than You ThinkUsed Cars | Search AdsUndoTopCars15 Ugliest Cars Ever MadeTopCarsUndoezzin.com20 Breathtaking Places to See Before You Dieezzin.comUndoFood World Magazine15 Fruits that Burn Fat Like CrazyFood World MagazineUndoDrhealth35 Foods That Should Never Be Placed in the RefrigeratorDrhealthUndoHappyTricks.comHer House Always Smells Amazing – Try her Unique Trick!HappyTricks.comUndolast_img read more

Walensee 8° — Geocache of the Week

first_imgContinue to explore some of the most amazing geocaches around the world. Traditional GC2B614 by tuxracer Grab your helmets, headlamps, and a spelunking friend for a cave diving adventure in the Swiss Alps for this Geocache of the Week. With high peaks and the beautiful Walensee it’s easy to see why people come to this location, but cache owner, tuxracer, had their eyes set on something else. Deep below the skyscraping mountains and glimmering alpine lake is a vast underground cave formerly used for mining. A perfect opportunity for an ambitious D5/T4 geocache with an Indiana Jones feel.  Got everything? Great! Just walk right past the pretty nature stuff and look around for a wooden door in the side of the mountain. If you are greeted with a rush of cool air, you’ve found the right one. Entering the mine is an instant treat. Left over from years past are rail lines, railcars, equipment, and even newspapers.  There’s a lot to explore in the mine and it’s easy to get turned around. Overall the cache takes around 3 hours to locate and get out. Keeping an eye out for a reflective arrow is key to finding the container and easier said than done. Though with 1000+ finds and 760 Favorite points, it seems like your chances are pretty good if you want to take the plunge. On your journey to the center of the earth, there are extremely high ceilings and a vast openness that makes you forget this is all beneath the surface. You’ll stumble upon rusty relics, stairs leading to new levels and tunnels, and underground lakes that’ll give new perspective as to what could possibly be behind an old wooden door.  Difficulty: 5 Terrain: 4center_img A cave diving buddyMinimum 3 hours time and nerves of steelGood sense of direction and appropriate aid Helmet and headlamp (extra batteries)Good footwear Gloves and warm clothes SnacksNo fear of the dark  For this cache you’ll need to have the following: Check out all of the Geocaches of the Week on the Geocaching blog. If you would like to nominate a Geocache of the Week, fill out this form.Share with your Friends:More Location: St. Gallen, Switzerland N 47° 07.814 E 009° 17.210 SharePrint RelatedWhere Bats Dare — Geocache of the WeekMarch 15, 2017In “Community”Stone Appendix – GCR8N3 – GEOCACHE OF THE WEEK – July 23, 2012July 23, 2012In “Community”Cova Tancada – GC1ZW11 – GEOCACHE OF THE WEEK – November 15, 2012November 15, 2012In “Community”last_img read more

Pastefire: Launch iPhone Tasks From Your Desktop Browser

first_imgmarshall kirkpatrick Related Posts Why IoT Apps are Eating Device Interfaces Tags:#mobile#web What it Takes to Build a Highly Secure FinTech …center_img Role of Mobile App Analytics In-App Engagement The guys at AppsFire has done it again – it’s built a simple but compelling little iPhone app that you should probably download right away. Pastefire is an app that lets you capture and act upon information sent with a click from your computer’s browser to your iPhone. See a phone number on the web you want to call? A text or a link you want to paste into an SMS? Click the Pastefire bookmarklet on your browser, then launch the Pastefire app on your phone and the most appropriate action for the type of media captured will happen automatically. It’s easy, fast and free. The app has some bugs, but it’s a good start. For some reason a captured address doesn’t get presented with a “search in Google” option in Pastefire, which would be really nice. I’m sure these things will be worked out.Not to overstate things, but this is a great example of device convergence that makes the iPhone all the more valuable – is it not? We love handy little services like this and the crew at Appsfire comes up with things like this all the time. Are there other handy little must-have iPhone hack apps we should know about? Let us know in comments below. The Rise and Rise of Mobile Payment Technologylast_img read more

New Assembly building for Jharkhand

first_imgPrime Minister Narendra Modi is scheduled to inaugurate Jharkhand’s own Assembly building at Ranchi on September 12. It is being dubbed as India’s first paperless Assembly.“Jharkhand will have its own Assembly building 19 years after its formation. The credit of having India’s first paperless State Legislative Assembly building goes to Jharkhand,” Chief Minister Raghubar Das said at Ranchi on Tuesday.Built at a cost of ₹465 crore, the Assembly has 57,220 square metres of built-up area. The 37-metre-tall dome has been the highlight of the spectacular edifice.The building, which has come up on 39 acres of land, reflects rich tribal culture of Jharkhand.last_img read more

Managing energy consumption in wireless IoT devices

first_imgJacob Beningo is an embedded software consultant, advisor and educator who currently works with clients in more than a dozen countries to dramatically transform their software, systems and processes. Feel free to contact him at jacob@beningo.com, at his website www.beningo.com, and sign-up for his monthly Embedded Bytes Newsletter. As the IoT develops and more edge devices are deployed in the field, undoubtedly a significant portion of those devices will be battery operated. Battery operated wireless edge nodes are convenient and cost effective because they require no access to electrical infrastructure and can be easily deployed. The potential problem with battery operated devices is that when developers are under the gun to get their devices built and out the door, battery life is one of the last things on their mind. There are several things that a developer can do throughout their development cycle to ensure that they will be able to properly manage their device’s energy consumption.First, when a developer is designing their hardware, they need to break-up their hardware into subsystems and provide the ability to add a current shunt resistor to measure the current consumption for each subsystem. Developers should consider adding the current shunt resistor to circuits and subsystems such as:The microcontrollerThe wireless controllerSensor arraysThe power supplies inputs and outputsAnd any other specific subsystems that could potentially draw significant currentBeing able to monitor the current in these systems will allow a developer to determine where energy is being consumed and devise ways to minimize that consumption. The nice thing about these current shunts is that in production they can be replaced with zero-ohm resistors or the on-board microcontroller’s analog to digital convert could be connected to them so that the energy consumption could be monitored remotely.Next, a developer has a huge amount of control over the energy consumption based just on the software that they are writing for their embedded controller. The microcontroller has the ability to not just manage its own energy consumption but also manage the wireless controller and other onboard circuits. For example, a developer with an Arm Cortex-M processor can put their system into a low power mode and wait for an interrupt to wake the system. The code to implement such a behavior is as simple as writing a few lines of code:while(true){   _WFI();}which quite literally means “Wait For Interrupt” and puts the system into a low power state. That interrupt could be from the wireless controller, telling the microcontroller that there is data to be processed or it could from any other event in the system that has been deemed important enough to wake the system. Don’t forget that battery powered devices should be architected so that they are event driven and otherwise spend most of their time sleeping waiting for events to occur.Another favorite method that can help manage energy consumption is the to use the Sleep On Exit capabilities in the Arm Cortex-M processors. This essentially tells the processor to skip the context switch that occurs at the start and end of an interrupt because the same interrupt is expected to fire again. This can shave dozens of clock cycles off the software execution which can add up significantly over the course of weeks and months. This feature is usually enabled by enabling the sleep-on-exit feature in the system control block as follows:SCB->SCR = SCB | 0x2U;while(true){   _WFI();}Now these last two techniques are simple things that can be done in the software to help minimize the microcontroller’s energy consumption. The real secret though to managing the energy consumption in an IoT device is that you have to measure the energy consumption and correlate it to the code that is being executed. Without making measurements, there is no way to understand if an interrupt is firing too often; to realize if a particular function is executing longer than expected; or to determine where the energy is going in the system. Once measurements are performed, a developer can then intelligently dig in and determine the best optimizations for the system that can then lead to a finely tuned and efficient wireless IoT node.Optimizing and managing the energy consumption in a wireless IoT device is usually one of the last things a developer considers before they push the product out the door. In some circumstances, it’s more important to get to market and then tune and update later. Still, managing energy consumption will be difficult if a developer hasn’t thought through the problem and ensured that the hardware and software is in place to easily update the system or monitor its field behavior. We’ve looked at a few simple ideas to get you started today which can at least ensure you have a few fundamental starting points to managing your own system’s energy consumption.Additional Resources:Optimize your Systems Battery Life using the Otii Arc7 Tips for Optimizing Embedded Software7 Tricks for Estimating Battery Life Share this:TwitterFacebookLinkedInMoreRedditTumblrPinterestWhatsAppSkypePocketTelegram Tags: IoT center_img Continue Reading Previous ST: STM32 software package brings Amazon Alexa technology to simple connected objectsNext The hacker’s nightmare cipherlast_img read more

Amazon Rings police partnerships troubled security industry group

first_imgAn industry group for video surveillance is calling out Ring. Chris Monroe/CNET An industry group focused on surveillance says Ring’s hundreds of police partnerships are troubling because they suffer from a lack of transparency. The Monitoring Association, a trade group made up of security and alarm companies, said it was concerned that police are helping to promote Ring products without informing consumers. Ring is a member of the association.Police across the US have found Ring video doorbells to be a useful tool for getting footage and creating impromptu surveillance networks in residential communities. Ring has partnered with at least 231 police departments in the US, according to a map created by Shreyas Gandlur. Despite multiple requests, the company hasn’t disclosed how many police departments it’s partnered with in total. Unlike the situation with other video doorbells and surveillance products, police often end up promoting Ring sales through partnerships with the company. Police often get free cameras to give away to residents and will encourage people to buy Ring’s products, including the accompanying Neighbors app. The close relationship between Ring and hundreds of police agencies has become a concern for The Monitoring Association, which called for more transparency about the arrangements.”We are troubled by recent reports of agreements that are said to drive product-specific promotion, without alerting consumers about these marketing relationships,” TMA President Ivan Spector said in a statement published Wednesday. “This lack of transparency goes against our standards as an industry, diminishes public trust and takes advantage of these public servants.” Spector is also president of Sentinel Alarm. Ring says its products help make neighborhoods safer and that it doesn’t require police to promote Ring devices. It also said it notifies users about partnerships through alerts in the Neighbors app. “When new law enforcement agencies come on board, we inform users through in-app alerts via a regional announcement,” a Ring spokesperson said. “In addition, Ring does not support programs that require users to provide law enforcement with access to their cameras or footage as a condition for receiving a Ring device.”The industry group’s concerns echo complaints by privacy advocates. Fight for the Future, a tech-focused nonprofit, launched a campaign in July calling for cities to ban police partnerships with Ring.  “When an industry association that represents security and surveillance camera companies thinks that your practices are too invasive and lack transparency, that really says something,” Fight for the Future’s deputy director, Evan Greer, said in a statement. “This should be setting off alarm bells for local elected officials in the hundreds of cities that already have these partnerships.”Originally published Aug. 8, 10:27 a.m. PT.Update, 2:08 p.m.: Adds Ring comment. Comments Smart Home Security 2center_img Tags Share your voicelast_img read more

TRS workers attack forest guards police with sticks in Telangana

first_imgScreen grab from a video of the incident.A police team and forest range guard officers were attacked allegedly by the Telangana Rashtra Samiti (TRS) workers in Sirpur-Kaghaznagar area of Telangana’s Komaram Bheem Asifabad district, on Sunday, June 30.A video shared on social media platforms shows a group of men attacking the forest range officers and thrashing their vehicles.#WATCH Telangana: A police team & forest guards were attacked allegedly by Telangana Rashtra Samithi workers in Sirpur Kagaznagar block of Komaram Bheem Asifabad district, during a tree plantation drive. (29-06) pic.twitter.com/FPlME1ygCp— ANI (@ANI) June 30, 2019The incident took place during a tree plantation drive on the land, which was allegedly encroached upon by the TRS leaders.The victim has reportedly identified the man who attacked her as Koneru Krishna, Zila Parishad vice-chairman and brother of Sirpur TRS MLA Koneru Konappa.”Forest department is terrorising the aboriginal adivasi farmers and confiscating their land forcefully. I was there to resolve the issue and to ensure justice for tribal as forest officials were destroying crops in the name afforestation,” the accused TRS leader was quoted as saying in an India Today report.”I tried to pacify department authorities but in vain the attack was accidental action not intentional,” he added.Chief Minister of the state K Chandrashekhar Rao-led TRS, which had scored a landslide victory in the state assembly, suffered a setback in the in recently-concluded Lok Sabha election.While the ruling party had claimed that it will bag 16 out of 17 seats in the Lok Sabha, the party only won nine, bringing down its tally from 11 in the 2014 general election.last_img read more

Houston Police Carry SemiAutomatic Guns At Bush Hobby Airports

first_img Share Photo via WikimediaThe Houston Police Department has confirmed to News 88.7 the officer who carry the AR-15 rifles are highly trained to use them, and not every police officer will carry one.Some Houston police officers are carrying semi-automatic rifles at Bush Intercontinental and Hobby airports, beginning this Thanksgiving travel season.Officials said it’s not just going to be for Turkey Day travel; Houston police and airport officials have been discussing the use of semi-automatic rifles for over a year.According to the Houston Chronicle, HPD officers will carry the rifles during heightened travel periods, including Christmas and spring break, and following any major domestic incidents.The Houston Police Department has confirmed to News 88.7 the officer who carry the AR-15 rifles are highly trained to use them, and not every police officer will carry one. Houston Police Lieutenant David Acres said to KHOU, “We’re just simply doing it to increase security here at the airport.” Officials are stressing the extra security measure isn’t in response to a threat.Houston Police add AR-15 rifles and more bomb sniffing dogs at Bush and Hobby Airports during busy Thanksgiving travel period. Details on @Fox26Houston pic.twitter.com/Xp3e13vycy— Ivory Hecker FOX 26 (@IvoryHecker) November 21, 2017last_img read more